Publications - Center for Additive Manufacturing - CAM
Navy Additive Manufacturing Afloat Capability Analysis, Authors: Nathan Bnaks, Daniel J. Ferreira, Jerome A. Mccauley, II, Joseph T. Trinh, Kenneth S. Zust, Advisors: Douglas Van Bossuyt, Amela Sadagic. June 2020
Triboelectric Nanogenerators (TENG) with Rotational Motion, Author: Joseph A. Kessopha, Advisor: Young W. Kwon, Second Reader: Jarema M. Didoszak. March 2020.
Additive Manufacturing Laboratories at Sea and Their Added-Value to the Navy's Seagoing Warfighter, Authors: Eduardo A. Nicholls, Wesley Y. Han, Joseph P. Davis, Advisors: Thomas J. Housel, Bryan J. Hudgens. December 2019.
Efficiency for Lethality: Additive Manufacturing ROI Modeling and Complete Adoption, Author: Joseph T. Giordano, Advisors: Amela Sadagic, Robert J. Eger III. December 2019.
A Systems Approach to Additive Manufacturing in the Marine Corps, Author: Ian Carter, Advisors: Kristen Tsolis, Raymond R. Buettner Jr. September 2019.
Operational and Mission Readiness Impact of Additive Manufacturing Deployment in the Navy Supply Chain, Author: Jose A. Lopez III, Advisor: Howard Pace Jr., Second Reading: Ibrahim E. Gunduz. September 2019.
Novel Nanomaterial-Paraffin-Epoxy Phase-Change Material Formulations, Author: Joshua A. Hanna, Advisor: Claudia C. Luhrs, Second Reader: Troy Ansell. June 2019.
Networked Logistics: Turning the Iron Mountain into an Iron Network, Author: Gregory E. Lynch, Advisor: Susan M. Sanchez, Second Reader: Mark A. Raffetto. June 2019.
Waste Heat Recovery from a Gas Turbine Engine Using a Heat Exchanger and Associated Centrifugal Compressor Volute Design and Simulation, Author: Michael Kaim, Advisors: Garth V. Hobson, Douglas L. Seivwright. June 2019.
Establishing an Additive Manufacturing (Am) Navy Enlisted Classification for the Machinery Repairman to Enable Efficient Use of Am and Mass Adoption of the Technology, Authors: Gilbert Garcia Jr.; Bradford L. Edenfield, Kazuma Yoshida, Advisors: William D. Hatch II, Kenneth H. Doerr, Amela Sadagic. June 2019.
Reduction Expansion Synthesis of Sintered Metal, Author: Wilson L. Rydalch, Advisors: Jonathan Phillips, Claudia C. Luhrs. June 2019.
Novel Formulations and Processing Conditions to 3d Print CU Alloys for Naval Applications, Author: Gabriel D. Supe, Advisor: Claudia C. Lurhs, Second Reader: Garth V. Hobson. June 2019.
Design and Construction of a Propeller Open Water Testing Apparatus and Testing of a Stereolithography 3D Printed Model Propeller, Author: William R. Hentschel, Certified by Alexandra Techet. May 2019.
Design, Construction, and Testing of a Solar-Powered, Multirotor, Unmanned Aerial Vehicle, author: Brian P. Gleason, Advisors: Sherif N. Michael, Kevin D. Jones. December 2018.
Mechatronics: The Development, Analysis, and Ground-Based Demonstrations of Robotic Spacecraft Hopping with a Manipulator, Author: Justin L. Komma, Advisor: Marcello Romano, Second Reader: Josep Virgili-Llop. December 2018.
Fabrication of Shape Memory Alloys Using Affordable Additive Manufacturing Routes, Author: Farsai Anantachaisilp, Advisor Claudia C. Luhrs, Second Reader: Marcello Romano. December 2018.
Developing and Testing Sintered and Polymer-Infused 3d-Printed Aluminum Reactive Materials, Author: Miguel K. Lewis, Advisor: Joseph P. Hooper, Second Reader: Troy Ansell. December 2018.
Additive Manufacturing Solutions in the United States Marine Corps, Authors: Zachary E. Daugherty, Andrew J. Heiple, Advisors: Simona Tick, Timothy Winn. December 2017.
Improvements in Operational Readiness by Distributing Manufacturing Capability in the Supply Chain through Additive Manufacturing, Author: Matthew T. Einhorn, Advisor: Matthew G. Boensel, Paul Beery. December 2017.
Operational Cybersecurity Risks and Their Effect on Adoption of Additive Manufacturing in the Naval Domain, Author: Michael D. Grimshaw, Advisor: Amela Sadagic, Second Reader: Victor Garza. December 2017.
Qualification and Certification of 3d Printed Parts for Naval Ships, Author: Kristopher K. DeVisser, Advisors: Paul Beery, William Solitario. December 2017.
Analysis of Additive Manufacturing for Sustainment of Naval Aviation Systems, Author: David M. Coyle, Advisors: Geraldo Ferrer, Armen Krudian, Second Reader: Karen Holness. September 2017.
Feasibility of Tactical Air Delivery Resupply Using Gliders, Author: Chaz R. Henderson, Advisor: Oleg A. Yakimenko, Second Reader: Fotis A. Papoulias. December 2016.
Transonic Axial Splittered Rotor Tandem Stator Stage, Author: Aaron D. Terrell, Advisor: Anthony Gannon, Second Reader: Garth Hobson. December 2016.
An Analysis of Additive Manufacturing Production Problems and Solutions, Authors: Benjamin G. Muniz; Kevin M. Peters, Advisors: Cory E. Yoder, Rene Rendon. December 2016.
Using Additive Manufacturing to Mitigate the Risks of Limited Key Ship Components of the Zumwalt-Class Destroyer, Authors: Xiao Y. Wang, James R. Whitworth, Advisors: Charles Pickar, Raymond Jones. December 2016.
The Effects of Disruptive Technology on Project Interdiction, Author: Timothy L. Adduce, Advisor: Matthew W. Carlyle. December 2016.
Achieving Ship's Mission Flexibility through Designing, Printing and Operating Unmanned Systems with Additive Manufacturing and Delayed Differentiation, Author: Mong Lin Sin, Advisor: Ronald Giachetti, Second Reader: Christopher Adams. September 2016.
Wing-Embedded, Cross-Flow-Fan, Vertical Takeoff and Landing Air Vehicle, Author: Jeremiah J. Fulton, Advisors: Garth V. Hobson, Anthony J. Gannon. June 2016.
Development of Improved Design and 3D Printing Manufacture of Cross-Flow Fan Rotor, Author: Timothy J. Waterman, Advisors: Garth V. Hobson, Anthony J. Gannon. June 2016.
Additive Manufacturing (AM) in Expeditionary Operations: Current Needs, Technical Challenges, and Opportunities, Author: Matthew Daniel Friedell, Advisors: Amela Sadagic, Don Brutzman, Second Reader: Behrokh Khoshnevis. June 2016.
Countering Weapons of Mass Destruction: A Preliminary Field Study in Improving Collaboration, Authors: Derek W. Lothringer; Matthew S. McGraw; Matthew D. Rautio; Leif H.K. Thaxton, Advisors: Leo Blanken, Zachary Davis, Second Reader: John Dillard. March 2016.
Reduction Expansion Synthesis for Magnetic Alloy Powders, Author: Samuel L. Lowell, Advisors: Jonathan Phillips, Claudia C. Luhrs. December 2015.
Entering the Matrix: The Challenge of Regulating Radical Leveling Technologies, Author: Jennifer J. Snow, Advisors: Leo J. Blanken, Zachary S. Davis. December 2015.
Additive Manufacturing: An Analysis of Intellectual Property Rights on Navy Acquisition, Authors: Carrie Paben, Wendell K. Stephens, Sr., Advisors: Douglas Brinkley, Matt Kremer. December 2015.
Additive Manufacturing: Preparing for the Reality of Science Fiction, Author: William A. Windle, Advisors: Thomas Mackin, John Rollins. September 2015.
Navy Additive Manufacturing: Adding Parts, Subtracting Steps, Authors: Victor Cunningham; Christopher A. Schrader, James (Trae) Young, Advisors: Bryan Hudgens, Douglas Brinkley. June 2015.
Additive Manufacturing in the Marine Corps, Author: Luke J. McLearen, Advisor: Raymond Buettner, Second Reader: Gerald Scott. June 2015.
Prototyping and Characterization of an Adjustable Skew Angle Single Gimbal Control Moment Gyroscope, Author: Shawn M. Kocis, Advisor: Mark Karpenko, Second Reader: I. Michael Ross. March 2015.
Solid Hydrocarbon Assisted Reduction: A New Process of Generating Micron Scale Metal Particles, Author: Ryan M. McCabe, Advisors: Jonathan Phillips, Claudia Luhrs. March 2015.
An Analysis of Item Identification for Additive Manufacturing (3-D Printing) within the Naval Supply Chain, Authors: Jason A. Morgan; Jacob M. Prentiss, Advisors: Douglas E. Brinkley, Simona Tick. December 2014.
Navy Additive Manufacturing: Policy Analysis for Future DLA Material Support, Author: Christopher O'Connor, Advisors: Geraldo Ferrer, Nicholas Dew. December 2014.
Mandibular Advancing Positive Pressure Apnea Remediation Device (MAPPARD), Author: Benjamin T. Morehead, Advisor: Joseph A. Sullivan, Second Reader: Jeffrey D. Weekly. June 2014.
Reducing Costs and Increasing Productivity in Ship Maintenance Using Product Lifecycle Management, 3D Laser Scanning, and 3D Printing, Author: Cameron J. Mackley, Advisor: Thomas Housel, Second Reader: Glenn Cook. March 2014.
Visualization of Big Data through Ship Maintenance Metrics Analysis for Fleet Maintenance and Revitalization, Author: Isaac J. Donaldson, Advisor: Thomas Housel, Second Reader: Johnathan Mun. March 2014.
An Investigation into the Use of 3D Scanning and Printing Technologies in the Navy Collaborative Product Lifecycle Management, Author: Benjamin R. Hernandez, Jr., Advisors: Thomas Housel, David Ford. December 2013.
Design and Prototyping of a Satellite Antenna Slew Testbed, Author: Gregory M. Contreras, Advisors: Mark Karpenko, I.M. Ross. December 2013.
Analysis of the Potential Impact of Additive Manufacturing on Army Logistics, Authors: Brock A. Zimmerman; Ellis E. Allen, III, Advisors: Douglas E. Brinkley, Bryan J. Hudgens. December 2013.
Cost Reduction through the Use of Additive Manufacturing (3D Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy's Maintenance Programs, Author: Michael E. Kenney, Advisor: Thomas Housel, Second Reader: Jonathan Mun. September 2013.
Novel Synthesis of 3D Graphene-CNF Electrode Architectures for Supercapacitor Applications, Author: Jason Wayne Downs, Advisors: Claudia C. Luhrs, Dragoslav Grbovic. June 2013.
Development and Qualification of a Specialized Gas Turbine Test Stand to Research the Potential Benefits of Nanocatalyst Fuel Additives, Author: Nathan A. Kramer, Advisor: Jose O. Sinibaldi. December 2007.
3D Visualization of an Invariant Display Strategy for Hyperspecteral Imagery, Author: Kang Suk Kim, Advisors: Richard C. Olsen, Donald P. Brutzman. December 2002.
An Investigation into the Effects of Vermiculite on Nox Reduction and Additives on Sooting and Exhaust Infrared Signature from a Gas Turbine Combustor, Author: Kurt R. Engel, Advisor: D.W. Netzer, Second Reader: R.P. Shreeve. September 1990.